Rhinails at MITEX 2026: Hall 10, Crocus Expo Moscow

Rhinails will exhibit at MITEX 2026 - the 19th Moscow International Tool, Equipment and Technology Exhibition

from 10 to 13 November 2026 at Crocus Expo IEC, Pavilion 2, Moscow.

You will find us in the China Zone, Hall 10, Stands 10-13, inside the joint pavilion of Chinese export brands.

Come to the stand with your specification, your tool model, or a fastening problem you have not managed to

solve yet - that last conversation is usually the most productive one.

MITEX 2026 at a Glance

Fig. 1 - The official Rhinails invitation to MITEX 2026.

Save it - the stand number and the three contact QR codes are on it.

For the daily opening hours and visitor registration, check the official MITEX schedule before you travel.

The dates and the venue above are confirmed by the organiser.

Where to Find Us

Fig. 2 - China Zone, Hall 10, Stands 10-13 - the details worth noting before you arrive.

Three things are worth writing down before you travel:

1. The hall - Hall 10. MITEX spreads across a large venue, so going straight to the right hall saves most of your walking.

2. The zone - China Zone. Our stands sit inside the joint pavilion of Chinese export brands.

3. The stand numbers - 10-13, on the floor.

If you would rather not search for us, message us in advance through the contact page, WhatsApp or WeChat,

and we will arrange a time to meet you at the stand.

What We Are Bringing to Moscow

Rhinails has manufactured collated fasteners and pneumatic tools for 30 years, and the full production range will be

represented on the stand:

• Collated staples - 4J, 10J, 10F, 80, N, P and K(90) series in bright, zinc coated, galvanized and stainless steel,

  plus fence staples and C/D ring staples for wire and mesh fixing. See the full staples range.

• Coil nails - smooth, spiral and ring shank, in plastic or paper collation, for framing, roofing, pallets and crating.

• Browse the coil nails range.

• Brad nails and finish nails - F, T and ST series for interior fit-out, cabinetry and trim. See the brad nails range.

• Concrete and cement nails - hardened steel masonry nails for fixing into concrete and block. See concrete nails.

• Screws - collated screws, self-drilling screws and drywall screws. See the screws range.

• Pneumatic tools - staplers and nailers matched to the consumables above, so a tool and its fasteners can be

  specified together. See the pneumatic tool range.

Fig. 3 - Spiral shank coil nails for structural framing, roofing and pallet work.

Fig. 4 - 10J series staples, 20 gauge with an 11.1 mm crown - the workhorse of furniture and panel production.

Fig. 5 - 80 series staples, a wider crown for webbing, panel edges and heavier upholstery builds.

Why We Exhibit at MITEX

Tools and fasteners are consumables: a distributor sells the same category every month, and what decides

whether an order repeats is not the price on the first container but whether the second one behaves the

same way as the first.

That is the conversation we want to have in Moscow. Our position is straightforward:

• Tolerances held batch to batch. Crown width, wire diameter and collation are controlled and recorded,

  because a strip that measures "about right" is a jam waiting to happen in a customer's tool.

• Tool compatibility tested, not assumed. Each product line is run in mainstream pneumatic and cordless tools,

  so the answer to "will it feed in my gun" is a test result rather than a promise.

• Certification you can file. ISO 9001:2015 quality management certification, with CE, RoHS and SGS test reports

  available on request.

• OEM and private label. Custom head forms, shank types, coatings, lengths and branded packaging for buyers

  who sell under their own name.

MITEX is one of the shows where distributors, importers and tool brands in the region meet their supply side in

one place, which makes it the right venue for exactly this kind of discussion.

Fig. 6 - Four days, one hall, and the conversations that decide next season's orders.

Plan Your Visit

A trade show visit gets far more productive with five minutes of preparation:

1. Note the stand - China Zone, Hall 10, Stands 10-13.

2. Bring the specification that matters. For staples and nails: series, crown width, leg length, wire gauge,

   coating and annual volume. For tools: the model number you run today.

3. Bring a problem job. If you have a fastening application that keeps failing - a strip that jams, a coating

   that fails outdoors, a staple that tears the material - bring it. Diagnosing it at the stand takes minutes;

   doing it by email takes weeks.

4. Book a slot in advance. Message us through the contact page, WhatsApp or WeChat and we will make

   sure the right person is free when you arrive.

5. Download the catalogue before you travel. It makes the stand conversation specific instead of introductory

   download the Rhinails catalogue.

If You Cannot Attend

Not everyone can travel to Moscow in November, and that should not cost you an order. Send your specification

through the contact page or WhatsApp and we will confirm compatibility, check availability and quote - with a

sample pack where a test is needed. Bulk buyers are welcome to ask for the specification sheet, tolerances and

certification documents up front.

We also exhibit elsewhere during the year. Recaps from previous shows give a good sense of how we work at

a stand: Brazil BDE Expo 2025 and Dubai 2025.

FAQ

Q: When and where is MITEX 2026?
A: MITEX 2026 runs from 10 to 13 November 2026 at Crocus Expo IEC, Pavilion 2, Moscow - that is the 65-66 km

mark of the Moscow City Ring (MKAD), postcode 143 401.

Q: Where is the Rhinails stand?
A: China Zone, Hall 10, Stands 10-13, inside the joint pavilion of Chinese export brands.

Q: Do I need an appointment to visit the stand?
A: No, you are welcome to walk up. An appointment simply means the person who handles your product category

is free when you arrive - message us through the contact page, WhatsApp or WeChat beforehand.

Q: What should I bring to the stand?
A: Your specification (series, crown width, leg length, wire gauge, coating, volume) and, for tools, the model number

you run. A sample of the fastener that is causing problems is even better.

Q: Which products can I discuss at MITEX 2026?
A: Collated staples, fence staples, coil nails, brad and finish nails, concrete and cement nails, collated and self-drilling

screws, and the pneumatic staplers and nailers that run them.

Q: I cannot travel to Moscow. Can I still get a quotation?
A: Yes. Send your specification through the contact page or WhatsApp. We check compatibility and availability, then

quote - and we can send a sample pack where a physical test is needed.

About Rhinails

Rhinails is a fastener manufacturer with 30 years of experience producing collated staples, coil nails, brad nails, concrete

nails and pneumatic tools for distributors, importers and tool brands. The company holds ISO 9001:2015 quality management certification, with CE, RoHS and SGS test reports available on request, and supports OEM and private-label production.

Contact us to arrange a meeting at MITEX 2026 or to request a quotation.