| Material: | |
|---|---|
| Diameter: | |
| Length: | |
| Shank Type: | |
| Gauge: | |
| Availability: | |
| Quantity: | |
Collated Concrete Nails
Rhinails
Rhinails Collated Gas Drive Pins are ballistic-grade steel fasteners in 10-piece plastic strips for rapid direct fixing into concrete, masonry, and steel. Available in 19mm to 38mm lengths with +/-0.02mm diameter tolerance. They penetrate up to 3mm structural steel without pre-drilling, built for MEP conduit saddles, ceiling grids, and cable trays.
Looking for Factory-Direct Collated Gas Drive Pins? Wholesale pricing from 19mm to 38mm. Fast bulk delivery and custom branding. |
Fast direct fastening for high-volume commercial installations:
Instant Penetration: Drives directly into concrete and 3mm steel plates with zero pre-drilling.
Continuous 10-Shot Firing: Engineered plastic strip feeds smoothly without jamming or premature detachment.
Dual Anti-Rust Coating: Long-term corrosion protection in humid ceiling plenums and covered outdoor assemblies.
Extreme Accuracy: Tight +/-0.02mm diameter tolerance prevents tool misfires and piston wear.
Product Type | Plastic Collated Gas Drive Pins |
Collation | 10 Nails / Strip (Durable Blue Plastic Strip) |
Length Options | 19mm, 22mm, 25mm, 27mm, 32mm, 38mm |
Tolerance | Wire Diameter Controlled Within +/-0.02mm |
Point Design | Ballistic Bullet Point for Maximum Piercing |
Steel Capacity | Penetrates 3mm Structural Steel Without Drilling |
Surface Finish | Dual Anti-Corrosion Treatment (Black / Zinc) |
Packaging | 1000 pcs / Box, 10 Boxes / Master Carton (10000 pcs) |
Main Uses | Ceiling Hangers, Cable Trays, Pipe Clamps, Drywall Tracks |
Tool Match | Standard Gas Actuated & Battery Concrete Nailers |
Download Complete Fasteners Catalog Full dimensions, pullout data, and tool compatibility charts. |
Compared with manual drilling, drop-in anchors, and loose powder pins:
5x Faster Installation: One trigger pull sets the anchor. No drilling, no dust cleaning.
Reliable Holding Power: Ballistic bullet point compresses concrete for high pullout load.
Zero Pre-Drilling on Steel: Pierces 3mm steel brackets and structural flanges directly.
Tear-Resistant Strips: Plastic collation strip will not break or drop pins in tool pouches.
Cleaner Work Environment: Virtually zero silica dust on job sites, safer for indoor retrofits.
Hardened Core: Continuous mesh-belt heat treatment prevents pin bending on hard aggregate.
Dual Protective Barrier: Advanced phosphating and zinc galvanizing block rust in damp plenums.
Rigid Strip Polymer: Resists cold cracking down to -10 degrees Celsius and heat deformation up to 45 degrees Celsius.
Model | Length | Collation | Primary Use |
RNDP-19 | 19mm (3/4 inch) | 10 pcs / strip | Drywall steel tracks to solid concrete; brackets to 2-3mm steel |
RNDP-22 | 22mm (7/8 inch) | 10 pcs / strip | Electrical pipe clips, cable tray brackets, light ceiling hangers |
RNDP-25 | 25mm (1 inch) | 10 pcs / strip | Standard electrical conduit saddles, junction box brackets |
RNDP-27 | 27mm (1-1/16 inch) | 10 pcs / strip | Suspended ceiling main channels, window sub-frame connectors |
RNDP-32 | 32mm (1-1/4 inch) | 10 pcs / strip | Timber battens to masonry, heavy fire conduit clamps |
RNDP-38 | 38mm (1-1/2 inch) | 10 pcs / strip | Thick wood-to-concrete fixtures, exterior insulation brackets |
Request Factory-Direct Quotation Container bulk discounts and custom OEM packaging available. Fast 15-25 days lead time. |
Q: Are these pins compatible with standard gas nailers?A: Yes. Fits all standard 10-shot gas nailer magazines, including Powers, Ramset, Spit Pulsa, Hilti GX adapters, and standard commercial gas guns. |
Q: Can they penetrate 3mm steel without pre-drilling?A: Yes. High-hardness ballistic points pierce structural steel up to 3mm thick directly in a single shot. |
Q: What is the packaging and MOQ?A: 1000 pcs/box (100 strips), 10 boxes/master carton (10000 pcs). Standard neutral MOQ is 50 cartons; custom OEM box MOQ is 100 cartons. |
Q: Will the plastic strip jam the gun or shatter?A: No. High-tenacity polymer strips shear away cleanly during firing without leaving residue in the nosepiece. |
Q: Can you supply matching gas fuel cells?A: Yes. Matched high-combustion gas fuel cells are available for full container load shipments. |
Rhinails is a fastener manufacturer and one-stop supplier in Foshan, China, producing staples, brad nails, coil nails, screws and pneumatic nail guns. Founded in 1996 with a 150,000 sqm factory, 100+ automatic lines and 3,000 employees, we supply 50+ countries and support full OEM and ODM.
Looking for a Reliable Fastener Supplier? Factory-direct pricing. Free samples. MOQ from 30 cartons. |
Vertically integrated from raw steel wire to finished carton, on 100+ automatic production lines.
Every order passes four inspection gates, and each piece is inspected individually rather than batch sampled.
Download the Rhinails Fastener Catalog Full specifications and dimensions for every product line. |
ISO 9001:2015 certified, with CE, RoHS and SGS test reports available on request.
Send a drawing, sample or specification - we confirm it and submit a sample for your approval before mass production. Size, material, logo, color, finish and packaging are all customizable.
Nearly 30 years of export experience across Africa, the Middle East, Southeast Asia, South America and Europe.
Visit our 150,000 sqm factory in Foshan, or meet us at the Canton Fair each year.
Export packing with branded cartons and pallets, shipped by sea, air or express.
Production in 15 to 25 days, MOQ from 30 cartons, T/T or L/C, and free samples for qualified projects.
Confirmed quality issues are replaced or credited at no cost, with a response within 24 hours.
Ready to Start Your Fastener Order? Send your specifications and quantity for a factory-direct quotation. |