Rhinails 1010F Pneumatic Stapler 20 Gauge for Furniture

Rhinails 1010F Pneumatic Stapler is a 20 gauge pneumatic staple gun built around a CNC machined nozzle

that places 10F series staples from 6mm to 10mm precisely where you aim them. It runs on 4-7kgf/cm2 air

pressure, holds 140pcs per load, and its quick release mechanism cuts reload time by 40%, making it suitable

for sofa frame assembly, craft furniture and trim woodworking.

1010F Pneumatic Stapler - Jam Free Fastening for Furniture and Upholstery

The 1010F is a 20 gauge pneumatic staple gun designed for the tight, awkward corners of furniture work. It drives 10F series staples in 6mm, 8mm and 10mm lengths, holds 140pcs per load, and operates between 4kgf/cm2 and 7kgf/cm2. The nozzle is CNC machined, so staple placement stays precise at 6-10mm depth instead of drifting across a run of work.

The problem this gun is built to solve is jamming. In confined spaces such as a sofa interior or a built in wardrobe carcass, one misfire stops the whole bench, and clearing it costs more time than the shot itself. Rhinails addresses it with a precision engineered feed system and a quick release mechanism that cuts reload time by 40%. In testing at 6kgf/cm2 the gun returned a 98% jam free rate, and it finishes a project about 50% faster than a manual stapler doing the same work.

Key Specifications

Why Choose the 1010F Over a Manual Stapler or a Jamming Air Gun?

A manual stapler asks the operator to squeeze every staple, which limits both speed and consistent depth. A poorly fed air gun asks the operator to stop and clear jams instead. The 1010F takes the opposite approach: pneumatic drive with an anti jam mechanism, a CNC machined nozzle that keeps placement accurate, and a quick release magazine that gets you reloaded in a fraction of the time. The published figures are a 98% jam free rate at 6kgf/cm2 and roughly 50% faster project completion than working by hand.

The 1010F Pneumatic Stapler is used for:

• Sofa frame assembly and upholstery

• Craft furniture production

• Trim and interior woodworking

• Crate and case assembly

• Cabinet and wardrobe carcass work

CNC Machined Nozzle and a Feed System Built to Stay Jam Free

The nozzle is CNC machined rather than cast, which is what holds staple placement tight across 6-10mm lengths, and the muzzle is made of sturdy and durable materials so it survives contact with hardwood and framing. The trigger is manually operated to control the opening and closing of the air, and the magazine catch is designed to reduce the failure rate of air nail guns during operation. Combined with the precision engineered feed system, the gun runs consistently between 4kgf/cm2 and 7kgf/cm2.

If your line runs a specific staple length, collation or coating, send us the drawing or the sample you use today. We will confirm the matching 10F series staple and the pressure setting that keeps your reject rate down.

Matching Staples and Setup - 10F Series

Not sure which staple leg length fits your joint? Send us the combined thickness of the materials you are fastening and the tool you use, and we will recommend the right model.

30 Years of Fastener Manufacturing Expertise

Rhinails has been manufacturing industrial fasteners and pneumatic tools since 1996, supplying staples, brad nails, coil nails, screws and nail guns to distributors and contractors in more than 50 countries. Production covers steel wire drawing, staple forming, collation, tool assembly, inspection and export packing, so gauge, crown width and coating stay consistent from batch to batch. Every shipment is inspected before it leaves the factory, and we hold ISO 9001:2015 quality management certification, with CE, SGS and salt spray test reports available on request.

Staple Gun Series Comparison - Which One Fits Your Line?

View All Nail Guns | 10F Pneumatic Stapler Series

Frequently Asked Questions